Car Hand Wash In Melbourne: A Complete Guide On How-To Hand Washing Your Car seonorth, October 14, 2022 Getting a car hand wash in Melbourne is the best way to keep it clean and protect the paint. It is also the most effective way to remove dirt, road grime, and other contaminants. Washing your car by hand may seem like a lot of work, but it is actually quite simple. All you need is a bucket, a hose, a soft sponge or wash mitt, and some car wash soap. This guide will walk you through the process of hand washing your car step by step. By the end, you will know exactly how to get your car clean and shiny – without damaging the paint! 1) Gather Your Car Wash Supplies Before you get started, make sure you have everything you need to wash your car. This includes: A bucket or large basin filled with water (about 1/2 full). The larger the bucket, the less often you’ll have to refill it. Use warm water to rinse off your car and cold water to wash it. A hose with a spray nozzle on the end. A steady stream of water will help remove dirt and dislodge stubborn grime from your paint. A soft sponge or wash mitt – this will be used for washing the exterior of your car. You can also use an old towel if you don’t have one already lying around the house! Car wash soap – this is what will clean off all the dirt and grime from your vehicle’s exterior surfaces. Don’t use dish soap or laundry detergent, as they can leave behind residue, which will attract more dirt! 2) Rinse Your Car Thoroughly: If you have been driving around all day with dusty roads or dirty parking lots on your windshields, then rinse them off before starting to wash your car. This will prevent soap from getting into those crevices and having a difficult time removing them later on in the process (squeegeeing). 3) Wash the Top Half of Your Car First: Wash your car starting at the top and working your way down to the bottom. Wash the hood, roof, trunk lid, doors, fenders, and mirrors before moving on to other panels like rocker panels and lower body panels. Wipe away any dirt or debris that you find in these areas with a soft sponge or microfiber wash mitt. Use plenty of water so that it runs freely off each panel – this will help prevent water spots from forming later on. 4) Work your way down to the bottom: Start by working your way down from the top of your vehicle to its bottom. This will help you avoid getting water spots on your windows or windshield wipers from splashing them with dirty runoff water from higher up on your vehicle’s bodywork. 5) Squeegee off Excess Water: Once you’ve applied the soap, use a soft sponge or wash mitt to spread it around over your car’s bodywork and panels. Then rinse off any excess suds with a hose or bucket full of clean water (keeping in mind that you don’t want to get any dirt back on your paint). 6) Dry Your Car with a Towel: After washing, squeegee off all remaining water from your car’s surfaces using a microfiber towel (or another type of lint-free cloth). Make sure that you get into all the crevices and corners where water tends to collect – this will help prevent water spots from forming on your paint! 7) Clean the Wheels and Wheel Wells: Next, clean the wheels and wheel wells. You can use a soft brush or sponge applicator to wipe down the wheels and eliminate any dirt or grime that may have accumulated during your drive. You can also use a sprayer filled with diluted soap solution on these areas. Just spray some soap solution onto a soft brush or sponge applicator and scrub away! Be sure to rinse off all traces of soap after cleaning each wheel well so that you don’t leave behind any residue that could damage your paint job when it dries out later on. The bottom line: Hand washing your car is the best way to keep it clean and protect the paint. So when your car looks dirty, and you don’t want to bring it to the washing station, then give it a car hand wash in Melbourne. Author seonorth View all posts